ISO-10303-21;
HEADER;
FILE_DESCRIPTION (( 'STEP AP203' ),
    '1' );
FILE_NAME ('mike 5 floor pan.STEP',
    '2004-11-12T15:49:00',
    ( 'Eaton User' ),
    ( 'Eaton Corporation' ),
    'SwSTEP 2.0',
    'SolidWorks 2004073',
    '' );
FILE_SCHEMA (( 'CONFIG_CONTROL_DESIGN' ));
ENDSEC;

DATA;
#1 = ORIENTED_EDGE ( 'NONE', *, *, #2, .F. ) ;
#2 = EDGE_CURVE ( 'NONE', #3, #59, #64, .T. ) ;
#3 = VERTEX_POINT ( 'NONE', #60 ) ;
#4 = ORIENTED_EDGE ( 'NONE', *, *, #5, .T. ) ;
#5 = EDGE_CURVE ( 'NONE', #3, #55, #126, .T. ) ;
#6 = ADVANCED_FACE ( 'NONE', ( #122 ), #121, .F. ) ;
#7 = EDGE_LOOP ( 'NONE', ( #37, #39, #42, #44 ) ) ;
#8 = VERTEX_POINT ( 'NONE', #116 ) ;
#9 = MANIFOLD_SOLID_BREP ( 'NONE', #71 ) ;
#10 = EDGE_LOOP ( 'NONE', ( #53, #57, #1, #4 ) ) ;
#11 = ADVANCED_FACE ( 'NONE', ( #115 ), #114, .T. ) ;
#12 = ORIENTED_EDGE ( 'NONE', *, *, #76, .T. ) ;
#13 = ORIENTED_EDGE ( 'NONE', *, *, #54, .F. ) ;
#14 = EDGE_LOOP ( 'NONE', ( #13, #66, #67, #68, #69, #70 ) ) ;
#15 = ORIENTED_EDGE ( 'NONE', *, *, #21, .T. ) ;
#16 = ORIENTED_EDGE ( 'NONE', *, *, #84, .T. ) ;
#17 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
#18 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
#19 = VERTEX_POINT ( 'NONE', #109 ) ;
#20 = ORIENTED_EDGE ( 'NONE', *, *, #21, .F. ) ;
#21 = EDGE_CURVE ( 'NONE', #36, #19, #108, .T. ) ;
#22 = ORIENTED_EDGE ( 'NONE', *, *, #35, .T. ) ;
#23 = ADVANCED_FACE ( 'NONE', ( #104 ), #103, .F. ) ;
#24 = EDGE_LOOP ( 'NONE', ( #72, #74, #75, #77 ) ) ;
#25 = EDGE_CURVE ( 'NONE', #51, #49, #98, .T. ) ;
#26 = ORIENTED_EDGE ( 'NONE', *, *, #27, .F. ) ;
#27 = EDGE_CURVE ( 'NONE', #41, #51, #94, .T. ) ;
#28 = ORIENTED_EDGE ( 'NONE', *, *, #40, .T. ) ;
#29 = ADVANCED_FACE ( 'NONE', ( #156 ), #155, .F. ) ;
#30 = EDGE_LOOP ( 'NONE', ( #31, #34, #83, #85 ) ) ;
#31 = ORIENTED_EDGE ( 'NONE', *, *, #32, .T. ) ;
#32 = EDGE_CURVE ( 'NONE', #49, #33, #150, .T. ) ;
#33 = VERTEX_POINT ( 'NONE', #146 ) ;
#34 = ORIENTED_EDGE ( 'NONE', *, *, #35, .F. ) ;
#35 = EDGE_CURVE ( 'NONE', #36, #33, #145, .T. ) ;
#36 = VERTEX_POINT ( 'NONE', #141 ) ;
#37 = ORIENTED_EDGE ( 'NONE', *, *, #38, .T. ) ;
#38 = EDGE_CURVE ( 'NONE', #56, #8, #140, .T. ) ;
#39 = ORIENTED_EDGE ( 'NONE', *, *, #40, .F. ) ;
#40 = EDGE_CURVE ( 'NONE', #41, #8, #136, .T. ) ;
#41 = VERTEX_POINT ( 'NONE', #132 ) ;
#42 = ORIENTED_EDGE ( 'NONE', *, *, #43, .F. ) ;
#43 = EDGE_CURVE ( 'NONE', #59, #41, #131, .T. ) ;
#44 = ORIENTED_EDGE ( 'NONE', *, *, #58, .T. ) ;
#45 = ADVANCED_FACE ( 'NONE', ( #127 ), #192, .F. ) ;
#46 = EDGE_LOOP ( 'NONE', ( #47, #50, #26, #28 ) ) ;
#47 = ORIENTED_EDGE ( 'NONE', *, *, #48, .T. ) ;
#48 = EDGE_CURVE ( 'NONE', #8, #49, #187, .T. ) ;
#49 = VERTEX_POINT ( 'NONE', #183 ) ;
#50 = ORIENTED_EDGE ( 'NONE', *, *, #25, .F. ) ;
#51 = VERTEX_POINT ( 'NONE', #182 ) ;
#52 = ADVANCED_FACE ( 'NONE', ( #181 ), #180, .F. ) ;
#53 = ORIENTED_EDGE ( 'NONE', *, *, #54, .T. ) ;
#54 = EDGE_CURVE ( 'NONE', #55, #56, #175, .T. ) ;
#55 = VERTEX_POINT ( 'NONE', #171 ) ;
#56 = VERTEX_POINT ( 'NONE', #170 ) ;
#57 = ORIENTED_EDGE ( 'NONE', *, *, #58, .F. ) ;
#58 = EDGE_CURVE ( 'NONE', #59, #56, #169, .T. ) ;
#59 = VERTEX_POINT ( 'NONE', #165 ) ;
#60 = CARTESIAN_POINT ( 'NONE',  ( 6.046493871997988700E-016, 0.07599999999999999800, 4.937500000000000900 ) ) ;
#61 = DIRECTION ( 'NONE',  ( -1.224606353822377300E-016, 0.0000000000000000000, -1.000000000000000000 ) ) ;
#62 = VECTOR ( 'NONE', #61, 39.37007874015748100 ) ;
#63 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.07599999999999999800, 0.0000000000000000000 ) ) ;
#64 = LINE ( 'NONE', #63, #62 ) ;
#65 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
#66 = ORIENTED_EDGE ( 'NONE', *, *, #73, .F. ) ;
#67 = ORIENTED_EDGE ( 'NONE', *, *, #89, .F. ) ;
#68 = ORIENTED_EDGE ( 'NONE', *, *, #32, .F. ) ;
#69 = ORIENTED_EDGE ( 'NONE', *, *, #48, .F. ) ;
#70 = ORIENTED_EDGE ( 'NONE', *, *, #38, .F. ) ;
#71 = CLOSED_SHELL ( 'NONE', ( #52, #78, #11, #6, #23, #86, #45, #29 ) ) ;
#72 = ORIENTED_EDGE ( 'NONE', *, *, #73, .T. ) ;
#73 = EDGE_CURVE ( 'NONE', #90, #55, #164, .T. ) ;
#74 = ORIENTED_EDGE ( 'NONE', *, *, #5, .F. ) ;
#75 = ORIENTED_EDGE ( 'NONE', *, *, #76, .F. ) ;
#76 = EDGE_CURVE ( 'NONE', #19, #3, #160, .T. ) ;
#77 = ORIENTED_EDGE ( 'NONE', *, *, #92, .T. ) ;
#78 = ADVANCED_FACE ( 'NONE', ( #221 ), #220, .F. ) ;
#79 = EDGE_LOOP ( 'NONE', ( #80, #81, #82, #16, #15, #12 ) ) ;
#80 = ORIENTED_EDGE ( 'NONE', *, *, #2, .T. ) ;
#81 = ORIENTED_EDGE ( 'NONE', *, *, #43, .T. ) ;
#82 = ORIENTED_EDGE ( 'NONE', *, *, #27, .T. ) ;
#83 = ORIENTED_EDGE ( 'NONE', *, *, #84, .F. ) ;
#84 = EDGE_CURVE ( 'NONE', #51, #36, #215, .T. ) ;
#85 = ORIENTED_EDGE ( 'NONE', *, *, #25, .T. ) ;
#86 = ADVANCED_FACE ( 'NONE', ( #211 ), #210, .F. ) ;
#87 = EDGE_LOOP ( 'NONE', ( #88, #91, #20, #22 ) ) ;
#88 = ORIENTED_EDGE ( 'NONE', *, *, #89, .T. ) ;
#89 = EDGE_CURVE ( 'NONE', #33, #90, #205, .T. ) ;
#90 = VERTEX_POINT ( 'NONE', #201 ) ;
#91 = ORIENTED_EDGE ( 'NONE', *, *, #92, .F. ) ;
#92 = EDGE_CURVE ( 'NONE', #19, #90, #200, .T. ) ;
#93 = CARTESIAN_POINT ( 'NONE',  ( -26.12500000000000000, 0.07599999999999999800, -8.687500000000000000 ) ) ;
#94 = LINE ( 'NONE', #93, #158 ) ;
#95 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
#96 = VECTOR ( 'NONE', #95, 39.37007874015748100 ) ;
#97 = CARTESIAN_POINT ( 'NONE',  ( -26.12500000000000000, 0.07599999999999999800, -8.687500000000000000 ) ) ;
#98 = LINE ( 'NONE', #97, #96 ) ;
#99 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 7.536132396315209200E-017 ) ) ;
#100 = DIRECTION ( 'NONE',  ( -7.536132396315209200E-017, 0.0000000000000000000, -1.000000000000000000 ) ) ;
#101 = CARTESIAN_POINT ( 'NONE',  ( 6.046493871997988700E-016, 0.07599999999999999800, 4.937500000000000900 ) ) ;
#102 = AXIS2_PLACEMENT_3D ( 'NONE', #101, #100, #99 ) ;
#103 = PLANE ( 'NONE',  #102 ) ;
#104 = FACE_OUTER_BOUND ( 'NONE', #24, .T. ) ;
#105 = DIRECTION ( 'NONE',  ( 0.9517086177605508200, 0.0000000000000000000, -0.3070027799227581500 ) ) ;
#106 = VECTOR ( 'NONE', #105, 39.37007874015748900 ) ;
#107 = CARTESIAN_POINT ( 'NONE',  ( -14.50000000000000200, 0.07599999999999999800, 4.937500000000001800 ) ) ;
#108 = LINE ( 'NONE', #107, #106 ) ;
#109 = CARTESIAN_POINT ( 'NONE',  ( -14.50000000000000200, 0.07599999999999999800, 4.937500000000001800 ) ) ;
#110 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
#111 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
#112 = CARTESIAN_POINT ( 'NONE',  ( -6.046493871997988700E-016, 0.0000000000000000000, -4.937500000000000900 ) ) ;
#113 = AXIS2_PLACEMENT_3D ( 'NONE', #112, #111, #110 ) ;
#114 = PLANE ( 'NONE',  #113 ) ;
#115 = FACE_OUTER_BOUND ( 'NONE', #14, .T. ) ;
#116 = CARTESIAN_POINT ( 'NONE',  ( -14.50000000000000200, 0.0000000000000000000, -4.937499999999998200 ) ) ;
#117 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, -1.507226479263041800E-016 ) ) ;
#118 = DIRECTION ( 'NONE',  ( 1.507226479263041800E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ;
#119 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.07599999999999999800, -4.937500000000000900 ) ) ;
#120 = AXIS2_PLACEMENT_3D ( 'NONE', #119, #118, #117 ) ;
#121 = PLANE ( 'NONE',  #120 ) ;
#122 = FACE_OUTER_BOUND ( 'NONE', #7, .T. ) ;
#123 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
#124 = VECTOR ( 'NONE', #123, 39.37007874015748100 ) ;
#125 = CARTESIAN_POINT ( 'NONE',  ( 6.046493871997988700E-016, 0.07599999999999999800, 4.937500000000000900 ) ) ;
#126 = LINE ( 'NONE', #125, #124 ) ;
#127 = FACE_OUTER_BOUND ( 'NONE', #46, .T. ) ;
#128 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 1.507226479263041600E-016 ) ) ;
#129 = VECTOR ( 'NONE', #128, 39.37007874015748100 ) ;
#130 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.07599999999999999800, -4.937500000000000900 ) ) ;
#131 = LINE ( 'NONE', #130, #129 ) ;
#132 = CARTESIAN_POINT ( 'NONE',  ( -14.50000000000000200, 0.07599999999999999800, -4.937499999999998200 ) ) ;
#133 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
#134 = VECTOR ( 'NONE', #133, 39.37007874015748100 ) ;
#135 = CARTESIAN_POINT ( 'NONE',  ( -14.50000000000000200, 0.07599999999999999800, -4.937499999999998200 ) ) ;
#136 = LINE ( 'NONE', #135, #134 ) ;
#137 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 1.507226479263041600E-016 ) ) ;
#138 = VECTOR ( 'NONE', #137, 39.37007874015748100 ) ;
#139 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -4.937500000000000900 ) ) ;
#140 = LINE ( 'NONE', #139, #138 ) ;
#141 = CARTESIAN_POINT ( 'NONE',  ( -26.12500000000000000, 0.07599999999999999800, 8.687500000000000000 ) ) ;
#142 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
#143 = VECTOR ( 'NONE', #142, 39.37007874015748100 ) ;
#144 = CARTESIAN_POINT ( 'NONE',  ( -26.12500000000000000, 0.07599999999999999800, 8.687500000000000000 ) ) ;
#145 = LINE ( 'NONE', #144, #143 ) ;
#146 = CARTESIAN_POINT ( 'NONE',  ( -26.12500000000000000, 0.0000000000000000000, 8.687500000000000000 ) ) ;
#147 = DIRECTION ( 'NONE',  ( -5.031317168187420300E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ;
#148 = VECTOR ( 'NONE', #147, 39.37007874015748100 ) ;
#149 = CARTESIAN_POINT ( 'NONE',  ( -26.12499999999999600, 0.0000000000000000000, -4.852736867747366100E-031 ) ) ;
#150 = LINE ( 'NONE', #149, #148 ) ;
#151 = DIRECTION ( 'NONE',  ( 5.031317168187421300E-016, 0.0000000000000000000, -1.000000000000000000 ) ) ;
#152 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 5.031317168187421300E-016 ) ) ;
#153 = CARTESIAN_POINT ( 'NONE',  ( -26.12499999999999600, 0.07599999999999999800, -4.852736867747366100E-031 ) ) ;
#154 = AXIS2_PLACEMENT_3D ( 'NONE', #153, #152, #151 ) ;
#155 = PLANE ( 'NONE',  #154 ) ;
#156 = FACE_OUTER_BOUND ( 'NONE', #30, .T. ) ;
#157 = DIRECTION ( 'NONE',  ( -0.9517086177605508200, 0.0000000000000000000, -0.3070027799227584300 ) ) ;
#158 = VECTOR ( 'NONE', #157, 39.37007874015748900 ) ;
#159 = CARTESIAN_POINT ( 'NONE',  ( 6.046493871997988700E-016, 0.07599999999999999800, 4.937500000000000900 ) ) ;
#160 = LINE ( 'NONE', #159, #223 ) ;
#161 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, -7.536132396315207900E-017 ) ) ;
#162 = VECTOR ( 'NONE', #161, 39.37007874015748100 ) ;
#163 = CARTESIAN_POINT ( 'NONE',  ( 6.046493871997988700E-016, 0.0000000000000000000, 4.937500000000000900 ) ) ;
#164 = LINE ( 'NONE', #163, #162 ) ;
#165 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.07599999999999999800, -4.937500000000000900 ) ) ;
#166 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
#167 = VECTOR ( 'NONE', #166, 39.37007874015748100 ) ;
#168 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.07599999999999999800, -4.937500000000000900 ) ) ;
#169 = LINE ( 'NONE', #168, #167 ) ;
#170 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -4.937500000000000900 ) ) ;
#171 = CARTESIAN_POINT ( 'NONE',  ( 6.046493871997988700E-016, 0.0000000000000000000, 4.937500000000000900 ) ) ;
#172 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
#173 = VECTOR ( 'NONE', #172, 39.37007874015748100 ) ;
#174 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
#175 = LINE ( 'NONE', #174, #173 ) ;
#176 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
#177 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
#178 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.07599999999999999800, 0.0000000000000000000 ) ) ;
#179 = AXIS2_PLACEMENT_3D ( 'NONE', #178, #177, #176 ) ;
#180 = PLANE ( 'NONE',  #179 ) ;
#181 = FACE_OUTER_BOUND ( 'NONE', #10, .T. ) ;
#182 = CARTESIAN_POINT ( 'NONE',  ( -26.12500000000000000, 0.07599999999999999800, -8.687500000000000000 ) ) ;
#183 = CARTESIAN_POINT ( 'NONE',  ( -26.12500000000000000, 0.0000000000000000000, -8.687500000000000000 ) ) ;
#184 = DIRECTION ( 'NONE',  ( -0.9517086177605508200, 0.0000000000000000000, -0.3070027799227584300 ) ) ;
#185 = VECTOR ( 'NONE', #184, 39.37007874015748900 ) ;
#186 = CARTESIAN_POINT ( 'NONE',  ( -26.12500000000000000, 0.0000000000000000000, -8.687500000000000000 ) ) ;
#187 = LINE ( 'NONE', #186, #185 ) ;
#188 = DIRECTION ( 'NONE',  ( 0.9517086177605508200, 0.0000000000000000000, 0.3070027799227583700 ) ) ;
#189 = DIRECTION ( 'NONE',  ( -0.3070027799227584300, 0.0000000000000000000, 0.9517086177605509300 ) ) ;
#190 = CARTESIAN_POINT ( 'NONE',  ( -26.12500000000000000, 0.07599999999999999800, -8.687500000000000000 ) ) ;
#191 = AXIS2_PLACEMENT_3D ( 'NONE', #190, #189, #188 ) ;
#192 = PLANE ( 'NONE',  #191 ) ;
#193 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
#194 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
#195 =( CONVERSION_BASED_UNIT ( 'INCH', #196 ) LENGTH_UNIT ( ) NAMED_UNIT ( #65 ) );
#196 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #17 );
#197 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
#198 = VECTOR ( 'NONE', #197, 39.37007874015748100 ) ;
#199 = CARTESIAN_POINT ( 'NONE',  ( -14.50000000000000200, 0.07599999999999999800, 4.937500000000001800 ) ) ;
#200 = LINE ( 'NONE', #199, #198 ) ;
#201 = CARTESIAN_POINT ( 'NONE',  ( -14.50000000000000200, 0.0000000000000000000, 4.937500000000001800 ) ) ;
#202 = DIRECTION ( 'NONE',  ( 0.9517086177605508200, 0.0000000000000000000, -0.3070027799227581500 ) ) ;
#203 = VECTOR ( 'NONE', #202, 39.37007874015748900 ) ;
#204 = CARTESIAN_POINT ( 'NONE',  ( -14.50000000000000200, 0.0000000000000000000, 4.937500000000001800 ) ) ;
#205 = LINE ( 'NONE', #204, #203 ) ;
#206 = DIRECTION ( 'NONE',  ( -0.9517086177605508200, 0.0000000000000000000, 0.3070027799227581500 ) ) ;
#207 = DIRECTION ( 'NONE',  ( -0.3070027799227582100, 0.0000000000000000000, -0.9517086177605510500 ) ) ;
#208 = CARTESIAN_POINT ( 'NONE',  ( -14.50000000000000200, 0.07599999999999999800, 4.937500000000001800 ) ) ;
#209 = AXIS2_PLACEMENT_3D ( 'NONE', #208, #207, #206 ) ;
#210 = PLANE ( 'NONE',  #209 ) ;
#211 = FACE_OUTER_BOUND ( 'NONE', #87, .T. ) ;
#212 = DIRECTION ( 'NONE',  ( 5.031317168187420300E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ;
#213 = VECTOR ( 'NONE', #212, 39.37007874015748100 ) ;
#214 = CARTESIAN_POINT ( 'NONE',  ( -26.12499999999999600, 0.07599999999999999800, -4.852736867747366100E-031 ) ) ;
#215 = LINE ( 'NONE', #214, #213 ) ;
#216 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
#217 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
#218 = CARTESIAN_POINT ( 'NONE',  ( -6.046493871997988700E-016, 0.07599999999999999800, -4.937500000000000900 ) ) ;
#219 = AXIS2_PLACEMENT_3D ( 'NONE', #218, #217, #216 ) ;
#220 = PLANE ( 'NONE',  #219 ) ;
#221 = FACE_OUTER_BOUND ( 'NONE', #79, .T. ) ;
#222 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, -7.536132396315207900E-017 ) ) ;
#223 = VECTOR ( 'NONE', #222, 39.37007874015748100 ) ;
#224 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
#225 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
#226 = AXIS2_PLACEMENT_3D ( 'NONE', #18, #225, #224 ) ;
#227 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'mike 5 floor pan', ( #9, #226 ), #228 ) ;
#228 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #229 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #195, #194, #193 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
#229 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #195, 'distance_accuracy_value', 'NONE');
#230 = PERSON_AND_ORGANIZATION ( #232, #231 ) ;
#231 = ORGANIZATION ( 'UNSPECIFIED', 'UNSPECIFIED', '' ) ;
#232 = PERSON ( 'UNSPECIFIED', 'UNSPECIFIED', 'UNSPECIFIED', ('UNSPECIFIED'), ('UNSPECIFIED'), ('UNSPECIFIED') ) ;
#233 = PRODUCT ( 'mike 5 floor pan', 'mike 5 floor pan', '', ( #234 ) ) ;
#234 = MECHANICAL_CONTEXT ( 'NONE', #236, 'mechanical' ) ;
#235 = APPLICATION_PROTOCOL_DEFINITION ( 'international standard', 'config_control_design', 1994, #236 ) ;
#236 = APPLICATION_CONTEXT ( 'configuration controlled 3d designs of mechanical parts and assemblies' ) ;
#237 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #239, #238, ( #254 ) ) ;
#238 = PERSON_AND_ORGANIZATION_ROLE ( 'design_supplier' ) ;
#239 = PERSON_AND_ORGANIZATION ( #232, #231 ) ;
#240 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #242, #241, ( #254 ) ) ;
#241 = PERSON_AND_ORGANIZATION_ROLE ( 'creator' ) ;
#242 = PERSON_AND_ORGANIZATION ( #232, #231 ) ;
#243 = CC_DESIGN_APPROVAL ( #251, ( #254 ) ) ;
#244 = APPROVAL_DATE_TIME ( #245, #251 ) ;
#245 = DATE_AND_TIME ( #246, #247 ) ;
#246 = CALENDAR_DATE ( 2004, 12, 11 ) ;
#247 = LOCAL_TIME ( 10, 49, 0.0000000000000000000, #248 ) ;
#248 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 5, 0, .BEHIND. ) ;
#249 = APPROVAL_PERSON_ORGANIZATION ( #253, #251, #250 ) ;
#250 = APPROVAL_ROLE ( '' ) ;
#251 = APPROVAL ( #252, 'UNSPECIFIED' ) ;
#252 = APPROVAL_STATUS ( 'not_yet_approved' ) ;
#253 = PERSON_AND_ORGANIZATION ( #232, #231 ) ;
#254 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #233, .NOT_KNOWN. ) ;
#255 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT ( #257, #256, ( #275 ) ) ;
#256 = DATE_TIME_ROLE ( 'creation_date' ) ;
#257 = DATE_AND_TIME ( #258, #259 ) ;
#258 = CALENDAR_DATE ( 2004, 12, 11 ) ;
#259 = LOCAL_TIME ( 10, 49, 0.0000000000000000000, #260 ) ;
#260 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 5, 0, .BEHIND. ) ;
#261 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #263, #262, ( #275 ) ) ;
#262 = PERSON_AND_ORGANIZATION_ROLE ( 'creator' ) ;
#263 = PERSON_AND_ORGANIZATION ( #232, #231 ) ;
#264 = CC_DESIGN_APPROVAL ( #272, ( #275 ) ) ;
#265 = APPROVAL_DATE_TIME ( #266, #272 ) ;
#266 = DATE_AND_TIME ( #267, #268 ) ;
#267 = CALENDAR_DATE ( 2004, 12, 11 ) ;
#268 = LOCAL_TIME ( 10, 49, 0.0000000000000000000, #269 ) ;
#269 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 5, 0, .BEHIND. ) ;
#270 = APPROVAL_PERSON_ORGANIZATION ( #274, #272, #271 ) ;
#271 = APPROVAL_ROLE ( '' ) ;
#272 = APPROVAL ( #273, 'UNSPECIFIED' ) ;
#273 = APPROVAL_STATUS ( 'not_yet_approved' ) ;
#274 = PERSON_AND_ORGANIZATION ( #232, #231 ) ;
#275 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #254, #276 ) ;
#276 = DESIGN_CONTEXT ( 'detailed design', #278, 'design' ) ;
#277 = APPLICATION_PROTOCOL_DEFINITION ( 'international standard', 'config_control_design', 1994, #278 ) ;
#278 = APPLICATION_CONTEXT ( 'configuration controlled 3d designs of mechanical parts and assemblies' ) ;
#279 = SHAPE_DEFINITION_REPRESENTATION ( #282, #227 ) ;
#280 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #230, #281, ( #233 ) ) ;
#281 = PERSON_AND_ORGANIZATION_ROLE ( 'design_owner' ) ;
#282 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE',  #275 ) ;
#283 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'detail', '', ( #233 ) ) ;
#284 = CC_DESIGN_SECURITY_CLASSIFICATION ( #305, ( #254 ) ) ;
#285 = CC_DESIGN_APPROVAL ( #293, ( #305 ) ) ;
#286 = APPROVAL_DATE_TIME ( #287, #293 ) ;
#287 = DATE_AND_TIME ( #288, #289 ) ;
#288 = CALENDAR_DATE ( 2004, 12, 11 ) ;
#289 = LOCAL_TIME ( 10, 49, 0.0000000000000000000, #290 ) ;
#290 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 5, 0, .BEHIND. ) ;
#291 = APPROVAL_PERSON_ORGANIZATION ( #295, #293, #292 ) ;
#292 = APPROVAL_ROLE ( '' ) ;
#293 = APPROVAL ( #294, 'UNSPECIFIED' ) ;
#294 = APPROVAL_STATUS ( 'not_yet_approved' ) ;
#295 = PERSON_AND_ORGANIZATION ( #232, #231 ) ;
#296 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT ( #298, #297, ( #305 ) ) ;
#297 = DATE_TIME_ROLE ( 'classification_date' ) ;
#298 = DATE_AND_TIME ( #299, #300 ) ;
#299 = CALENDAR_DATE ( 2004, 12, 11 ) ;
#300 = LOCAL_TIME ( 10, 49, 0.0000000000000000000, #301 ) ;
#301 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 5, 0, .BEHIND. ) ;
#302 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #304, #303, ( #305 ) ) ;
#303 = PERSON_AND_ORGANIZATION_ROLE ( 'classification_officer' ) ;
#304 = PERSON_AND_ORGANIZATION ( #232, #231 ) ;
#305 = SECURITY_CLASSIFICATION ( '', '', #306 ) ;
#306 = SECURITY_CLASSIFICATION_LEVEL ( 'unclassified' ) ;
ENDSEC;
END-ISO-10303-21;